Emission factors for PM2.5, CO, CO2, NOx, SO2 and particle size distributions from the combustion of wood species using a new controlled combustion chamber 3CE
Emission factors for PM2.5, CO, CO2, NOx, SO2 and particle size distributions from the combustion of wood species using a new controlled combustion chamber 3CE
Authors
Cereceda Balic, Francisco
Toledo, Mario
Vidal, Victor
Guerrero, Fabian
Diaz Robles, Luis A.
Petit Breuilh, Ximena
Lapuerta, Magin
Toledo, Mario
Vidal, Victor
Guerrero, Fabian
Diaz Robles, Luis A.
Petit Breuilh, Ximena
Lapuerta, Magin
Authors
Date
Datos de publicaciĆ³n:
10.1016/j.scitotenv.2017.01.136
Keywords
Collections
Abstract
The objective of this research was to determine emission factors (EF) for particulate matter (PM2.5), combustion gases and particle size distribution generated by the combustion of Eucalyptus globulus (EG), Nothofagus obliqua (NO), both hardwoods, and Pinus radiata (PR), softwood, using a controlled combustion chamber (3CE). Additionally, the contribution of the different emissions stages associated with the combustion of these wood samples was also determined. Combustion experiments were performed using shaving size dried wood (0% humidity). The emission samples were collected with a tedlar bag and sampling cartridges containing quartz fiber filters. High reproducibility was achieved between experiment repetitions (CV < 10%, n = 3). The EF for PM2.5 was 1.06 g kg(-1) for EG, 1.33 g kg(-1) for NO, and 0.84 g kg(-1) for PR. Using a laser aerosol spectrometer (0.25-34 mu m), the contribution of particle emissions (PM2.5) in each stage of emission process (SEP) was sampled in real time. Particle size of 0265 pm were predominant during all stages, and the percentages emitted were PR (33%), EG (29%), and NO (21%). The distributions of EF for PM2.5 in pre-ignition, flame and smoldering stage varied from predominance of the flame stage for PR (77%) to predominance of the smoldering stage for NO (60%). These results prove that flame phase is not the only stage contributing to emissions and on the contrary, pre-ignition and in especial post-combustion smoldering have also very significant contributions. This demonstrates that particle concentrations measured only in stationary state during flame stage may cause underestimation of emissions. (C) 2017 Elsevier B.V. All rights reserved.